Sealed Charts and
Cards for
Coatings Tests
Unsealed Charts
for Coatings Tests
Special Substrates for
Coatings Tests
Paper-Testing Ink
& Printing Ink Test Sheets
Sag and Leveling
Test Charts & Applicators
Metal Panels for
Bakeable Coatings
Film Applicators
and Accessories
Scrub Resistance
Test Panel and Accessories
Leneta Company, Inc.
15 Whitney Rd.
Mahwah, NJ, 07430 USA

Toll-Free: 800.663.6324
Phone: 201.847.9300
Fax: 201.848.8833
Toll-Free: 800.663.5154

www.leneta.com
sales@leneta.com

We support the consensus standards process ofASTM International
All Categories > Film Applicators and Accessories > Leneta Wire-Cators™ > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Leneta Wire-Cators™

Check up to five results to perform an action.



Used to Apply Controlled Film Thickness Drawdowns of Liquid Coatings
Also known as: Wire-Bar Applicators, Mayer Rods
General Description: Wire-Wound Rods

Characteristics of Leneta Wire-Cators
  1. Wire Diameters: 2.5-75 mils (0.064-1.9 mm), provides wet film thicknesses: 0.18-6 mils (4.5-150 µm)
  2. Length of winding: 10 inches (254 mm). Sufficiently long to coat most standard size panels and charts.
  3. Length of rod: 12 inches (305 mm). Provides an inch (25 mm) clear for grasping at each end.
  4. Diameter of rod: 1/2 inch (12.7 mm). Thick enough to provide essentially perfect rigidity.
  5. Composition: All stainless steel. No rust or corrosion, even with waterborne coatings. Non-magnetic, permits use with steel panels on a magnetic chuck.




Compare Items
   
  Results 26 - 33 of 33 1 2 

Form

Item Name

Wire Diameter

Approximate Film Thickness

Length of Winding

WC-50 Leneta Wire-Cator™ 50 mil
1.27
mm
3.8 mil
98
µm
10 in
254
mm
WC-52 Leneta Wire-Cator™ 52 mil
1.32
mm
4.0 mil
100
µm
10 in
254
mm
WC-55 Leneta Wire-Cator™ 55 mil
1.40
mm
4.2 mil
106
µm
10 in
254
mm
WC-60 Leneta Wire-Cator™ 60 mil
1.52
mm
4.5 mil
114
µm
10 in
254
mm
WC-65 Leneta Wire-Cator™ 65 mil
1.65
mm
5.0 mil
125
µm
10 in
254
mm
WC-70 Leneta Wire-Cator™ 70 mil
1.78
mm
5.5 mil
138
µm
10 in
254
mm
WC-75 Leneta Wire-Cator™ 75 mil
1.91
mm
6.0 mil
150
µm
10 in
254
mm
WC-212 Standard Set of 12 Wire-Cators and Bench Stand N/A N/A 10 in
254
mm
  Results 26 - 33 of 33 1 2 
Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
The Leneta Company | Draw on Our Experience