Sealed Charts and
for Coatings Tests
Special Substrates for
& Printing Ink Test Sheets
Sag and Leveling
Test Charts & Applicators
Metal Panels for
Test Panel and Accessories
Leneta Company, Inc.
15 Whitney Rd.
Mahwah, NJ, 07430 USA
We support the consensus standards process of
Scrub Resistance Test Panel and Accessories
Leneta Calibration Scrub Test Panels
Email This Page
Save To Favorites
Form P121-A Leneta Calibration Scrub Test Panels
These are standard panels prepared by applying white emulsion paints on black scrub test panels. The films are indefinitely stable and the panels of each type essentially identical. They are used as controls in the measurement of scrub resistance, to obtain Calibration Ratings that normalize the wide variations often encountered for undefined reasons, among laboratories using the same scrub method. The Calibration Rating is the performance of the test paint panel expressed as a percentage relative to that of the selected Calibration Panel. Thus:
% Calibration Rating = Test Panel Cycles-to Failure/Calibration Panel Cycles-to-Failure x 100
The letter indicating the calibration panel type is appended to the calibration rating, e.g. 125A, 65C, 95D etc.
The figure to the left illustrates simultaneous side-by-side scrubbing of half-panels to maximize correlation, analogous to ASTM D 2486, Method B.
Note: ASTM D 4213 "Weight Loss Method" whereby:
Calibration Rating = Calibration Panel Weight Loss/Test Panel Weight Loss x 100
Cycles to Failure
Quantity per Box
Boxes per Case
ASTM D 2486
Typical Values per ASTM D2486, Method A
Related Leneta Items for P121-A, P121-C
SC-2 Leneta-ASTM Scrub Media
Form P121-10N Leneta Scrub Test Panels
more available ..
| Site created by
ThomasNet Web Solutions
and powered by