Form WC-36, Leneta Wire-Cator™ On Leneta Co.

Sealed Charts and
Cards for
Coatings Tests Unsealed Charts
for Coatings Tests Special Substrates for
Coatings Tests Paper-Testing Ink
& Printing Ink Test Sheets Sag and Leveling
Test Charts & Applicators Metal Panels for
Bakeable Coatings Film Applicators
and Accessories Scrub Resistance
Test Panel and AccessoriesLeneta Company, Inc.
15 Whitney Rd.
Mahwah, NJ, 07430 USA

Toll-Free: 800.663.6324
Phone: 201.847.9300
Fax: 201.848.8833
Toll-Free: 800.663.5154

www.leneta.com
sales@leneta.com

We support the consensus standards process of

All Categories > Film Applicators and Accessories > Leneta Wire-Cators™ > Form WC-36


	Form WC-36, Leneta Wire-Cator™

Used to Apply Controlled Film Thickness Drawdowns of Liquid Coatings
Also known as: Wire-Bar Applicators, Mayer Rods
General Description: Wire-Wound Rods

Characteristics of Leneta Wire-Cators

Wire Diameters: 2.5-75 mils (0.064-1.9 mm), provides wet film thicknesses: 0.18-6 mils (4.5-150 µm)
Length of winding: 10 inches (254 mm). Sufficiently long to coat most standard size panels and charts.
Length of rod: 12 inches (305 mm). Provides an inch (25 mm) clear for grasping at each end.
Diameter of rod: 1/2 inch (12.7 mm). Thick enough to provide essentially perfect rigidity.
Composition: All stainless steel. No rust or corrosion, even with waterborne coatings. Non-magnetic, permits use with steel panels on a magnetic chuck.